PowerColor Radeon HD3450 512MB User's Guide download pdf (Page 16)

Caution:

Remember to discharge your body’s static electricity by touching the

power supply case or the metal surface of the computer chassis.

4. Remove any unneeded graphics cards from the computer.

Warning:

Some graphics cards can get hot while operating. Wait approximately five

minutes after turning off the computer before touching the card.

Locate the PCIe® slots on the motherboard. If necessary, remove the

corresponding back panel cover.

Align the new graphics card in the PCIe slot and press firmly until the card

is fully seated.

Figure 2–1 Graphics Card Installation

7. Fasten the graphics card securely to the back panel.

8. Make sure the cables are not interfering with anything inside the computer

(for example, a cooling fan) and then replace the computer cover.

9. Reconnect any cables you have disconnected and plug in the computer

power cord.

10. Turn on the monitor and then the computer.

You now need to enable ATI CrossFireX in ATI Catalyst Control Center.

10 ATI CrossFireX

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 27 28

No comments

PowerColor Radeon HD3450 512MB User's Guide Page 16